How To Clean Water Dispenser Bottom Load

How To Clean Water Dispenser Bottom Load

The water dispenser on your countertop is a convenient way to keep water bottles filled and ready to drink throughout the day. But if you rarely clean out the reservoir, mineral buildup can make the water a bitter, unpalatable mess. Fortunately, cleaning a water dispenser is easy, and the process only takes a few minutes. You can also do it without calling in the plumber by learning how to clean a water dispenser bottom load.

What Is A Bottom Load Water Dispenser?

Water Dispenser

Bottom load water dispensers are becoming increasingly popular, as they offer a more environmentally friendly way to get clean water. They work by gravity feeding water into the dispenser from a lower reservoir, which means no need for filters or pumping. This is great news for people who want to help protect the environment, and it’s also great news for consumers who want to save money on their water bills. Bottom load water dispensers are also easy to use, making them perfect for busy homes and offices.

Why The Water Dispenser Gets Dirty?

Water Dispenser

There are many reasons why the water dispenser might become dirty. Water can splash on the floor and get tracked around, or it can accumulate dirt and sediment over time. Additionally, if the water dispenser is used frequently by a large number of people, it can become filled with bacteria and other contaminants.

15 Best Ways How To Clean Water Dispenser Bottom Load

1. First Clean The Bottom Load In A Water Dispenser

Clean The Bottom Load In A Water Dispenser

Before you start, clean out the bottom of the dispenser with a brush to remove any dirt or debris that is stuck in the slots. Even if the dispenser is clean, you should do this step because minerals from the water supply can make their way into the unit if you don’t.

Next, take a rag and fill it with hot water. Wring out the rag and then use it to wash down the bottom of the dispenser. Clean along the edges where the top and bottom pieces meet, then use the rag again to wipe out the bottom and edges. You can also use a bottle filled with vinegar and water to help clean out the bottom slot.

2. Rinse The Dispenser With Hot Water

Hot Water d

Once you’ve finished cleaning the bottom of the dispenser, rinse it with hot water to remove any remaining mineral deposits. Most mineral deposits come off with hot water, but if you want to be extra careful, you can use a sponge or a rag soaked in vinegar.

3. Use A Solution Of Vinegar And Baking Soda

Vinegar And Baking Soda To Clean Water Dispenser Bottom Load

If your dispenser still doesn’t taste good, you can mix up a baking soda and vinegar solution and then use that to clean the dispenser. First, pour about a cup of baking soda down the bottom of the dispenser and then fill it up with water. Let it sit for a few hours, then use a toothbrush to scrub out the baking soda.

After the baking soda is out, fill the dispenser with clean water and add one cup of vinegar. Let it sit for 24 hours, then use the toothbrush again to clean out the vinegar. After that, rinse the dispenser with hot water and dry it out before using it again.

4. Scrub The Dispenser With A Toothbrush

Scrub The Dispenser With A Toothbrush

If your dispenser still isn’t working right, or you just don’t feel like dealing with the cleaning process, you can try scrubbing it out with a toothbrush. First, fill a bucket or large bowl with warm water and a mild liquid dishwashing liquid. Scrub the dispenser clean with a toothbrush, then use a rag soaked in hot water to wipe it out and remove any toothbrush bristles.

After you’ve scrubbed it out, fill the dispenser with clean water and vinegar, let it sit for 24 hours, then rinse it out with hot water and dry it out. The baking soda and vinegar trick should take care of any build-up in the dispenser, but if it’s still not tasting good, you can give your local water company a call. They should be able to come out and provide you with a clean, fresh supply of water.

5. Pour In Some White Vinegar And Fill It With Water

White Vinegar And Fill It With Water

If none of these methods work, you can try filling the bottom of the dispenser with vinegar and water. Make sure to use a container that is large enough to hold the volume you’re using, and then pour the solution into the dispenser. Try not to get vinegar on the bottom of your dispenser, as it can stain and damage it. Let the solution sit in the dispenser for 24 hours, then pour out the vinegar and fill it with clean water. Let it sit for 24 hours before using it again.

Keep in mind that if you do use chemicals to clean your water dispenser, you shouldn’t drink the water that comes out of it for at least 24 hours. After that, make sure to clean the unit thoroughly before using it again.

6. How Do You Clean A Water Dispenser With Baking Soda And Vinegar?

Clean A Water Dispenser With Baking Soda And Vinegar?

If you want to keep the cleaning process as simple as possible, you can use a mixture of baking soda and vinegar to clean your water dispenser. First, pour about a cup of baking soda down the dispenser and then fill it with water. Let it sit for a few hours, then use a toothbrush to scrub out the baking soda.

After the baking soda is out, fill the dispenser with clean water and add one cup of vinegar. Let it sit for 24 hours, then use the toothbrush again to clean out the vinegar. After that, rinse the dispenser with hot water and dry it out before using it again.

While these cleaning solutions will get your water dispenser sparkling, they won’t get rid of all the buildup from mineral deposits. That’s why you should schedule a regular plumber visit to your home. The plumber can check the condition of your plumbing and get rid of any buildup that is causing your water to be bitter and unpalatable.

7. Pour In Some White Vinegar 

White Vinegar 

White vinegar is a safe, effective way to kill bacteria, including that which builds up in a water dispenser. Mix 1 part vinegar with 9 parts water to fill the dispenser to the rim. Let the mixture sit for 30 minutes, then empty and refill the reservoir with fresh, cold water. Continue this process two or three times to completely clean the water dispenser.

8. How Do You Clean Algae Out Of A Water Cooler?

Clean Algae Out Of A Water Cooler

Algae is a common problem in most home water dispensers, especially in areas with warm water or high levels of chlorine and other disinfectants in the water. You can keep your water dispenser algae-free with regular cleaning.

Fill a bucket with warm water and 1 tablespoon of dish soap. Scrub the inside of the water dispenser with a brush, then pour out the water and vinegar solution and refill with fresh cold water. Let the water dispenser sit for 30 minutes to a maximum of two hours, then empty and refill once more with fresh cold water. Repeat this process two or three times to kill the bacteria and algae.

9. Cleaning Primo Bottom Load Dispenser

Cleaning Primo Bottom Load Dispenser
Cleaning the bottom of your dispenser is easier than scrubbing the sides, and since mineral deposits are at the bottom, it’s also less messy.

Use a toothbrush to scrub the bottom of your dispenser. Soap, water, and a toothbrush will completely clean the bottom of the dispenser.

If the mineral deposits are too hard to scrub off, fill a bucket with warm water and a few drops of dish soap. Soak a bandana or old towel in the soapy water, and use the dirty cloth to scrub the bottom of the dispenser.

10. Clean The Bottom Loaded Water Cooler With Vinegar

If the water in your cooler is just fine, but the dispenser is full of calcium build up, you can try a vinegar clean.Remove the water filter from the dispenser, and pour 2 cups of vinegar into the reservoir. Let the vinegar sit for 30 minutes, then empty and refill the reservoir with fresh, cold water. Continue this process two or three times to completely clean the water dispenser.If the mineral build up does not go away, or the water in your dispenser is discolored, you may have a build up of mineral deposits from absorbing water from hard water areas.

11. How To Clean A Deep Water Cooler?

How To Clean A Deep Water Cooler?

If you have a really old water cooler that’s been in continuous use, it may not be able to be cleaned with regular water and vinegar. Instead, you’ll need to call in a professional to deep clean your machine. A deep water cooler has one or more reservoirs deeper than 6 inches.

If you have a newer water cooler, you can clean it yourself. All you need is a bottle of vinegar, a sponge, and a rag, and you can clean your water dispenser in less than five minutes.

12. How Many Days After The Cooler Should Be Cleaned?

Ideally, you should clean your water cooler every two weeks. However, if you rarely use it, you can go six or seven weeks between cleanings. You don’t want to wait longer than necessary because mineral deposits will build up in the water cooler, and you don’t want to use heavily mineralized water for drinking. Over time, the buildup can lead to a funky taste and odor in your water, as well as in your coffee.

13. How To Get The Vinegar Taste Out Of A Water Cooler?

If the vinegar smell persists even after washing the reservoir, you can remove it with a mixture of baking soda and vinegar. Start by pouring one cup of baking soda into a bucket. Then add a cup of vinegar, and mix with a spoon. Once the baking soda and vinegar combination is well combined, sponge the inside of the water cooler with the solution. Leave it on for 10 minutes, then rinse thoroughly. The baking soda will absorb the vinegar smell and neutralize it. Once the vinegar smell is gone, you can refill the water cooler with fresh water and continue to use it.

14. Advantage of cleaning Water Dispenser Bottom Load

Clean water dispensers are a great way to improve the hygiene of your office or home. Not only do they keep your drinks clean, but they also help preserve the environment.

One of the benefits of cleaning the bottom load of a water dispenser is that it can reduce the amount of bacteria that accumulates over time. By regularly cleaning this part of the dispenser, you can help keep your building and its occupants healthy.

Another benefit is that dirty water dispensed from a dirty water dispenser can contain high levels of bacteria and other contaminants. By cleaning this part of the machine, you can reduce these levels and make sure that everyone in your building has access to clean drinking water.

15. Benefits of cleaning a bottom load water dispenser

Cleaning a bottom-load water dispenser can be beneficial for several reasons. First, it can help to keep your water clean and free of debris. Second, it will keep your water dispenser running smoothly and efficiently. And lastly, cleaning a bottom-load water dispenser regularly can help to prevent build-up and corrosion.

Final Thought To Clean Water Dispenser Bottom Load

There are many benefits to keeping your water dispenser clean. Not only will it make your water taste better, but it will also help keep your pipes from getting clogged. When your water cooler is clean, you can also expect fewer headaches and migraines from poor water quality. Cleaning your water dispenser isn’t hard, and it’s something you should do on a semi-regular basis.

If you have questions about how to clean a water dispenser bottom load or how to clean other types of residential water equipment, contact a plumber in your area today.

Scroll to Top