The water dispenser on your countertop is a convenient way to keep water bottles filled and ready to drink throughout the day. But if you rarely wash out the reservoir, mineral buildup can make the aqua a bitter, unpalatable mess. Fortunately, cleaning a rain atomizer is easy, and the process only takes a few minutes. You can also do it without calling in the plumber by learning how to clean a water dispenser bottom load.
What Is A Bottom Load Water Dispenser?
Bottom load aqua atomizers are becoming increasingly popular, as they offer a more environmentally friendly way to get wash aqua. They work by gravity feeding aqua into the atomizer from a lower reservoir, which means no need for filters or pumping. This is great news for people who want to help protect the environment, and it’s also great news for consumers who want to save money on their aqua bills. Dispensers are also easy to use, making them perfect for busy homes and offices.
Why The Water Dispenser Gets Dirty?
There are many reasons why the atomizer might become dirty. Aqua can splash on the floor and get tracked around, or it can accumulate dirt and sediment over time. Additionally, if the drinking fountain is used frequently by a large number of people, it can become filled with bacteria and other contaminants.
15 Best Ways
1. First Clean The Bottom Load
Before you start, clean out the bottom of the dispenser with a brush to remove any dirt or debris that is stuck in the slots. Even if the atomizer is wash, you should do this step because minerals from the rain supply can make their way into the unit if you don’t.
Next, take a rag and fill it with hot aqua. Wring out the rag and then use it to wash down the bottom of the atomizer. Clean along the edges where the top and bottom pieces meet, then use the rag again to wipe out the bottom and edges. You can also use a bottle filled with vinegar and aqua to help wash out the bottom slot.
2. Rinse The Dispenser
Once you’ve finished cleaning the bottom of the dispenser, rinse it with hot aqua to remove any remaining mineral deposits. Most mineral deposits come off with hot aqua , but if you want to be extra careful, you can use a sponge or a rag soaked in vinegar.
3. Use A Solution Of Vinegar And Baking Soda
If your dispenser still doesn’t taste good, you can mix up a baking soda and vinegar solution and then use that to clean the atomizer. First, pour about a cup of baking soda down the bottom of the atomizer and then fill it up with water. Let it sit for a few hours, then use a toothbrush to scrub out the baking soda.
After the baking soda is out, fill the atomizer with clean aqua and add one cup of vinegar. Let it sit for 24 hours, then use the toothbrush again to wash out the vinegar. After that, rinse the dispenser with hot aqua and dry it out before using it again.
4. Scrub The Dispenser With A Toothbrush
If your dispenser still isn’t working right, or you just don’t feel like dealing with the cleaning process, you can try scrubbing it out with a toothbrush. First, fill a bucket or large bowl with warm aqua and a mild liquid dishwashing liquid. Scrub the atomizer clean with a toothbrush, then use a rag soaked in hot water to wipe it out and remove any toothbrush bristles.
After you’ve scrubbed it out, fill the dispenser with wash aqua and vinegar, let it sit for 24 hours, then rinse it out with hot rain and dry it out. The baking soda and vinegar trick should take care of any build-up in the atomizer, but if it’s still not tasting good, you can give your local water company a call. They should be able to come out and provide you with a wash, fresh supply of water.
5. Pour In Some White Vinegar And Fill It With Water
If none of these methods work, you can try filling the bottom of the dispenser with vinegar and aqua. Make sure to use a container that is large enough to hold the volume you’re using, and then pour the solution into the atomizer. Try not to get vinegar on the bottom of your dispenser, as it can stain and damage it. Let the solution sit in the atomizer for 24 hours, then pour out the vinegar and fill it with cleanse aqua. Let it sit for 24 hours before using it again.
Keep in mind that if you do use chemicals to clean your water dispenser, you shouldn’t drink the aqua that comes out of it for at least 24 hours. After that, make sure to cleanse the unit thoroughly before using it again.
6. How Do You Clean A Dispenser With Baking Soda And Vinegar?
If you want to keep the cleaning process as simple as possible, you can use a mixture of baking soda and vinegar to clean your refreshment atomizer. First, pour about a cup of baking soda down the dispenser and then fill it with refreshment. Let it sit for a few hours, then use a toothbrush to scrub out the baking soda.
After the baking soda is out, fill the atomizer with cleanse refreshment and add one cup of vinegar. Let it sit for 24 hours, then use the toothbrush again to cleanse out the vinegar. After that, rinse the dispenser with hot water and dry it out before using it again.
While these cleaning solutions will get your refreshment atomizer sparkling, they won’t get rid of all the buildup from mineral deposits. That’s why you should schedule a regular plumber visit to your home. The plumber can check the condition of your plumbing and get rid of any buildup that is causing your rain to be bitter and unpalatable.
7. Pour In Some White Vinegar
White vinegar is a safe, effective way to kill bacteria, including that which builds up in a drinking fountain. Mix 1 part vinegar with 9 parts refreshment to fill the atomiser to the rim. Let the mixture sit for 30 minutes, then empty and refill the reservoir with fresh, cold water. Continue this process two or three times to completely clean the refreshment atomiser.
8. How Do You Clean Algae Out Of A Water Cooler?
Algae is a common problem in most home refreshment dispensers, especially in areas with warm rain or high levels of chlorine and other disinfectants in the water. You can keep your drinking fountain algae-free with regular cleaning.
Fill a bucket with warm water and 1 tablespoon of dish soap. Scrub the inside of the drinking fountain with a brush, then pour out the and vinegar solution and refill with fresh cold water. Let the refreshment atomiser sit for 30 minutes to a maximum of two hours, then empty and refill once more with fresh cold water. Repeat this process two or three times to kill the bacteria and algae.
9. Cleaning Primo Bottom Load Dispenser
Cleaning the bottom of your dispenser is easier than scrubbing the sides, and since mineral deposits are at the bottom, it’s also less messy.
Use a toothbrush to scrub the bottom of your dispenser. Soap, water, and a toothbrush will completely cleanse the bottom of the atomiser.
If the mineral deposits are too hard to scrub off, fill a bucket with warm sprinkle and a few drops of dish soap. Soak a bandana or old towel in the soapy sprinkle, and use the dirty cloth to scrub the bottom of the atomiser.
10. Clean The Bottom Loaded Water Cooler With Vinegar
If the water in your cooler is just fine, but the dispenser is full of calcium build up, you can try a vinegar clean.Remove the sprinkle filter from the atomiser, and pour 2 cups of vinegar into the reservoir. Let the vinegar sit for 30 minutes, then empty and refill the reservoir with fresh, cold water. Continue this process two or three times to completely cleanse the sprinkle atomiser.If the mineral build up does not go away, or the sprinkle in your dispenser is discolored, you may have a build up of mineral deposits from absorbing water from hard water areas.
11. How To Clean A Deep Water Cooler?
If you have a really old rain cooler that’s been in continuous use, it may not be able to be cleaned with regular sprinkle and vinegar. Instead, you’ll need to call in a professional to deep cleanse your machine. A deep rain cooler has one or more reservoirs deeper than 6 inches.
If you have a newer sprinkle cooler, you can clean it yourself. All you need is a bottle of vinegar, a sponge, and a rag, and you can clean your sprinkle dispenser in less than five minutes.
12. How Many Days After The Cooler Should Be Cleaned?
Ideally, you should cleanse your water cooler every two weeks. However, if you rarely use it, you can go six or seven weeks between cleanings. You don’t want to wait longer than necessary because mineral deposits will build up in the sprinkle cooler, and you don’t want to use heavily mineralized water for drinking. Over time, the buildup can lead to a funky taste and odor in your sprinkle, as well as in your coffee.
13. How To Get The Vinegar Taste Out Of A Water Cooler?
If the vinegar smell persists even after washing the reservoir, you can remove it with a mixture of baking soda and vinegar. Start by pouring one cup of baking soda into a bucket. Then add a cup of vinegar, and mix with a spoon. Once the baking soda and vinegar combination is well combined, sponge the inside of the water cooler with the solution. Leave it on for 10 minutes, then rinse thoroughly. The baking soda will absorb the vinegar smell and neutralize it. Once the vinegar smell is gone, you can refill the stream cooler with fresh stream and continue to use it.
14. Advantage of cleaning Water Dispenser Bottom Load
Water dispensers are a great way to improve the hygiene of your office or home. Not only do they keep your drinks cleanse, but they also help preserve the environment.
One of the benefits of cleaning the bottom load of a water atomiser is that it can reduce the amount of bacteria that accumulates over time. By regularly cleaning this part of the dispenser, you can help keep your building and its occupants healthy.
Another benefit is that dirty stream dispensed from a dirty stream atomiser can contain high levels of bacteria and other contaminants. By cleaning this part of the machine, you can reduce these levels and make sure that everyone in your building has access to cleanse drinking water.
15. Benefits of cleaning a bottom load water dispenser
Cleaning a bottom-load drinking fountain can be beneficial for several reasons. First, it can help to keep your rain cleanse and free of debris. Second, it will keep your stream atomiser running smoothly and efficiently. And lastly, cleaning a bottom-load stream atomiser regularly can help to prevent build-up and corrosion.
Final Thought
There are many benefits to keeping your water dispenser clean. Not only will it make your stream taste better, but it will also help keep your pipes from getting clogged. When your stream cooler is cleanse, you can also expect fewer headaches and migraines from poor water quality. Cleaning your water atomiser isn’t hard, and it’s something you should do on a semi-regular basis.
If you have questions about how to clean a water dispenser bottom load or how to clean other types of residential stream equipment, contact a plumber in your area today.
